Counter Surveillance

CS-RFT055S

Economy Handheld RF Signal Detector/Tracer This device can detect wireless devices from 50MHz~6.0GHz. Beep rate will increase as the signal strength increases. LED bar graph indicates the strength of detected signal.

Features:

• Detects wireless cameras and concealed wireless microphones.
• Detects all cell phones and cordless phones.
• 3 LED bar graph indicator: Level 1 (Weak), Level 2 (Medium), Level 3 (Strong).
• Dual strength indicator: Sound and LED.
• Sensitivity adjustment for pre calibration.
• Switchable Sound/Silent detection.
• Earphone socket for discreet  detection.

Specifications:

• Size: (L)87 x (W)55 x (T)24 (mm)
• Weight: about 70g (w/o batteries)
• Detecting range: 50MHz~6.0GHz
• Power: 3V DC (AAA/UM-r battery x 2)
• Detection range for 2.4GHz about 1.5m
• Detecting range for 5.8GHz  about 0.5m.
• Detecting range for 900MHz about 5m.

$165.00

CS-RFT055SRV

Handheld High Sensitivity RF Signal Detector/Tracer With Vibrate This device can detect wireless devices from 50MHz~6.0GHz. Beep rate will increase as the signal strength increases. LED bar graph indicates the strength of detected signal. This model also has a vibrating motor built in for discrete scanning.

Features:

• Detects wireless cameras and concealed wireless microphones.
• Detects all cell phones and cordless phones.
• 3 LED bar graph indicator: Level 1 (Weak), Level 2 (Medium), Level 3 (Strong).
• Dual strength indicator: Sound and LED.
• Sensitivity adjustment for pre calibration.
• Switchable Sound/Silent detection.
• Earphone socket for discreet  detection.

Specifications:

• Size: (L)87 x (W)55 x (T)24 (mm)
• Weight: about 105g (w/o batteries)
• Detecting range: 50MHz~6.0GHz
• Power: 3V DC (AAA/UM-r battery x 2)
• Detection range for 2.4GHz about 3m
• Detecting range for 5.8GHz  about 1.5m.
• Detecting range for 900MHz about 5m.

$195.00

CS-RFT055U8

RF Signal Detector with digital sensitivity display This new model applies LED digital (numeric) display to show the sensitivity level. With up and down buttons, user knows the sensitivity setting directly.

Features:

• Detects all the Hidden Wireless cameras and Concealed wireless microphones.
• Searches for all the Cellphones and Cordless phones.
• Dual strength indication: Audible / LED alarm
• Digital Sensitivity adjustment for pre calibration and source finding.
• Earphone socket for discrete detection.
• Easy setting for suitable benchmark
• Gain longer detecting distance in low noise environment
• Confusion free with factory default benchmark
• Battery low warning

Specifications:

• Size: L 140 x W 70 x T 25 mm
• Weight: About 190g
• Detecting range: 50MHz ~ 6.0GHz covering all types of wireless cameras, wireless microphones and cellular phones.
• Built-in rechargeable battery pack
• Warning mode:
  • 1. Beep alarm sound
  • 2. LED indication
  • 3. Vibration
  • 4. Earphone silent detection
• Sensitivity turner: Adjust detecting distance to find signal source.
• Sensitivity turner: Eliminates normal environment interference
• Detected distance for regular 10mW 2.4 GHz camera: 5 m
• Detected distance for regular 10mW 1.2 GHz camera: 6 m
• Detected distance for cellular phone: 10 m

$395.00

CS-DLP1000

Camera Lens Detector/Finder By looking through the window while pressing the detect button, even the smallest pinhole lens will be easily identified by a distinct red glow.

$280.00

Handheld Radio Frequency Counter

• Frequency range: 1 MHz - 3 GHz
• Weight: 210g
• Case: 80 mm * 68 mm * 31 mm stamped aluminium with black anodized finish
• Battery: Internal 4 * AA 600 mAH NiCd pack
• 10 digit liquid Crystal Display
• Low power consumption (Average 6 hour battery life)
• Hold switch to lock display
• Digital filter to prevent display of random noise
• Low battery indicator
• Ultra sensitive synchronous detector 16 section bar graph to show RF signal strength
• High speed 300 MHz direct counter with 0.1 Hz resolution
• 4 selectable gate speeds

$425.00

The CS-RFC1S hand-held radio frequency counter is compact, truly pocket-sized, versatile test instrument designed for measuring any digital, on/off keying or analogue signal on frequencies between 30 MHz and 2.8 GHz. Supplied complete with internal Ni-Cad pack, AC wall charger and 7 section telescopic antenna.

Features:

• 7 digit Liquid Crystal Display
• Frequency counter for digital, on/off keying and analogue signals with a minimum pulse width of 250 uS.
• Ultra sensitive synchronous detector - 16 section bar graph to show RF signal strength    (-35dBm to 0dBm)
• Two range positions - the 1 GHz position for frequencies between 30 MHz and 0.8 GHz and the 2.8 GHz position for frequencies between 500 MHz and 2.8 GHz.
• Squelch adjustment for input signals
• Hold switch to lock display
• Low battery indicator
• Low power consumption (Average 5 hour battery life)

Specifications:

Impedance: 50 Ohms (BNC Socket) VSWR less than 2:1

Frequency range: 30 MHz - 2.8 GHz

Sensitivity: less than 5 mV

Max. input: 15 dBm

Resolution: 10 KHz for digital signals or On/Off Keying &
1 KHz for Analogue Signals

Timebase: Less than 1 PPM at room temperature

Weight: 210 g

Size: 80 mm high x 68 mm wide x 31 mm deep

Case: Stamped aluminium with black anodized finish

Battery: Internal 4 x AA 600 mAH NiCd pack

Power: 9 VDC 300 mA

$495.00

The CS-RFT5002 is the latest advance in local field FM tester with Received Signal Strength Indication. Capable of locking automatically and almost instantly onto any FM signal within VHF to UHF range. Once locked it will demodulate the FM signal and permit it to be monitored through build-in speaker or earphone. Its RSSI feature is useful in locating fixed frequency transmitters or listening devices. There is also a feature for holding a locked channel. It also incorporates an ICOM CI-V interface. The great sensitivity to local field signals makes it ideal for RF security, counter-surveillance and radio communication testing applications. It comes complete with internal Ni-Cad pack, AC wall charger, VHF/UHF flexible antenna and audio earphone.

Features:

• Pocket size
• Built-in speaker
• Equipping with a 2.5 mm earphone and a 3.5 mm CI-V mini jack
• 5 section RSSI bar graph to show relative RF signal strength
• Incorporating an ICOM CI-V interface
• Enabling to hold on an active channel
• Low battery indicator
• Lock indicator to display signal reception
• Low power consumption (Average 5 hour battery life)
• Supplied with NiCd pack, AC wall charger, flexible antenna and earphone

Controls:

VOL Knob - This knob turns the tester on and adjusts sound volume.
SQL Knob - This tunes the squelch up or down to set the signal strength for reception.
SKIP Button - This frees the tester from any unwanted signals.
AUTO HOLD Switch - This automatically stops and holds on an active frequency.

Battery:

This tester can operate for up to five hours from its fully charged Ni-Cad batteries. They are charged when the unit is plugged into the supplied AC/DC adapter. Full recharge will occur over 12 to 16 hours. Before recharging the batteries you should be deep cycled occasionally by allowing them to completely discharge to maintain maximum battery capacity. The Ni-Cad batteries should last for several years. However, it is a good idea to check them every twelve months for signs of corrosion or leakage. Always replace the whole set if any one cell fails.

Warranty:

Spy Quip World guarantees the tester and accessories for one year against defects in manufacture. This warranty does not cover items that have been modified, subject to unauthorized repairs, misuse or abuse. This warranty does not cover damage caused by excessive power levels 15 dBm applied to the signal input.

CAUTION

Never make any kind of connection between the unit and a transmitter.

Specifications:

Frequency range: 30 MHz - 900 MHz (Cellular Blocked)

Modulation: FM

Deviation: < 100 KHz

Sensitivity: < -53 dBm at 500 MHz

Weight: 280 g

Size: 100 mm high x 68 mm wide x 31 mm deep

Impedance: 50 Ohms (BNC Socket)

Case: Stamped aluminium with black anodized finish

Battery: Internal 5 x AA 600 mAH NiCd pack

Power: 9 VDC 300 mA

$540.00

The CS-RFT6002II radio frequency tracer is useful in locating hidden transmitters or bugging devices in a room or automobile. It excels at silent detection of RF signals for RF security and counter-surveillance applications. Supplied complete with internal Ni-Cad pack, AC wall charger, short rubber antenna and earphone.

Features:

• Pocket size
• Built-in speaker to output alert tone
• Vibration motor and earphone for silent detection
• 5 section RSSI bargraph to show relative RF signal strength
• Low power consumption (Average 8 hour battery life)
• Supplied with NiCd pack, AC wall charger, short rubber antenna and earphone

Controls:

• SEN Knob - This knob turns the tracer on and adjusts sensitivity.

• VIBRATION Switch - This switch selects the tone or vibration alert output.

Battery:

This tester can operate for up to five hours from its fully charged Ni-Cad batteries. They are charged when the unit is plugged into the supplied AC/DC adapter. Full recharge will occur over 12 to 16 hours. Before recharging the batteries you should be deep cycled occasionally by allowing them to completely discharge to maintain maximum battery capacity. The Ni-Cad batteries should last for several years. However, it is a good idea to check them every twelve months for signs of corrosion or leakage. Always replace the whole set if any one cell fails.

Warranty:

Spy Quip World guarantees the tester and accessories for one year against defects in manufacture. This warranty does not cover items that have been modified, subject to unauthorized repairs, misuse or abuse. This warranty does not cover damage caused by excessive power levels 15 dBm applied to the signal input.

CAUTION

Never make any kind of connection between the unit and a transmitter.

Specifications:

Frequency range: 1 MHz - 6 GHz

Weight: 230 g

Size: 100 mm high x 68 mm wide x 31 mm deep

Impedance: 50 Ohms (BNC Socket)

Case: Stamped aluminium with black anodized finish

Battery: Internal 4 x AA 600 mAH NiCd pack

Power: 9 VDC 300 mA

$695.00

The CS-RFT6003II radio frequency tracer is useful in locating hidden transmitters or bugging devices in a room or automobile. It excels at silent detection of RF signals for RF security and counter-surveillance applications. Supplied complete with internal Ni-Cad pack, AC wall charger, short rubber antenna and earphone.

Features:

• Pocket size
• Built-in buzzer to output alert tone
• Vibration motor and earphone for silent detection
• 5 section RSSI bargraph to show relative RF signal strength
• Low power consumption (Average 8 hour battery life)
• Supplied with NiCd pack, AC wall charger, short rubber antenna and earphone

Controls:

• SEN Knob - This knob turns the tracer on and adjusts sensitivity.

• VIBRATION Switch - This switch selects the tone or vibration alert output.

Battery:

This tester can operate for up to five hours from its fully charged Ni-Cad batteries. They are charged when the unit is plugged into the supplied AC/DC adapter. Full recharge will occur over 12 to 16 hours. Before recharging the batteries you should be deep cycled occasionally by allowing them to completely discharge to maintain maximum battery capacity. The Ni-Cad batteries should last for several years. However, it is a good idea to check them every twelve months for signs of corrosion or leakage. Always replace the whole set if any one cell fails.

Warranty:

Spy Quip World guarantees the tester and accessories for one year against defects in manufacture. This warranty does not cover items that have been modified, subject to unauthorized repairs, misuse or abuse. This warranty does not cover damage caused by excessive power levels 15 dBm applied to the signal input.

CAUTION

Never make any kind of connection between the unit and a transmitter.

Specifications:

Frequency range: 1 MHz - 6 GHz

Weight: 210 g

Size: 80 mm high x 68 mm wide x 31 mm deep

Impedance: 50 Ohms (BNC Socket)

Case: Stamped aluminum with black anodized finish

Battery: Internal 4 x AA 600 mAH NiCd pack

Power: 9 VDC 300 mA

$685.00

CS-RFD5

The CS-RFD5 is a highly sensitive wide-band radio frequency detector with large dynamic range and enormous frequency range. RFD-5 functionality is optimized for professional detection and localization of radio listening devices.

Current radio-electronics offers a number of eavesdropping systems which cannot be detected before their operative activation. There are two basic solutions to prevent eavesdropping: electronic sweeping and permanent protection. The CS-RFD5 is designed for professional electronic sweeping and additionally it allows even a non-specialist to achieve basic permanent protection.

Features:

• High sensitivity and dynamic range
• High frequency range (detection up to 25GHz)
• Short pulse detection, peak level memory
• Interference filters
• Audio signal demodulation
• Geiger click indication
• 4-way signal strength indication (bar, numerical, delayed bar, peak)
• Detecting all radio devices including digital encoded
• Detecting spread spectrum, hopping and pulse transmissions
• Detecting mobile phones and computers (including manipulated devices)
• Permanent protection: events recording (including time and signal level)
• RF background elimination
• Possibility to calculate bug radiated power and distance

• Low power consumption, long battery life

Specifications:

Frequency range: 0.5MHz to 25GHz

Typical sensitivity: 0.06uW ERP (400MHz / 5cm / level=5)

Dynamic range: 43dB basic, + 40dB attenuation LOCAL

Detectable pulse width: >80us

HF filter (HF OFF): -26dB on 10MHz

Audio volume control: 4 levels (range 36dB)

Geiger click indication: internal buzzer

LCD indicator (2x12 characters)

Instant signal strength indication:

     bar indicator (39 levels)  numerical (251 levels)

Peak level indication:

     delayed bar indicator (24 levels)

     delayed numerical indication (251 levels)

Level refresh:

     level increase 1ms,  level decrease 6s (delayed indication)

Alarm counter: 99 events

Alarm memory: 16 events, including time and signal level

Next alarm record delay: 70s

Built in telescope antenna: adjustable 1 to 37cm

Earphone: stereo type, 32ohm

Battery low indication: below 7V

External power supply: 12V-20V DC

Accumulator recharge circuit: optimized for NiCd

Battery: 9V model 6F22, or 9V accumulator

Current consumption: 3.5 to 6mA

Mechanical size: 150 x 60 x 31mm

Weight: 295g

Video Transmitter Scanner

Features:

- Scanning Range:900~2520MHz
- Operation Mode: Auto/Manual
- Battery Life: 3 Hours
- Internal Power: AA Batt. x 4 (Alkaline)
- Video Display: 2.5" colour TFT LCD

- Status Display: 1.25" Black LCD